Our Facilities
With Taiwan’s largest metal additive manufacturing facilities, Digital-Can also has a wide range of “Selective Laser Sintering (SLS)” & “Stereolithography (SLA)” facilities.
We also have a “One AM Machine For Same Metallurgical Family” policy, assuring & maintaining the highest quality for each 3D print.
Our Facilities
With Taiwan’s largest metal additive manufacturing facilities, Digital-Can also has a wide range of “Selective Laser Sintering (SLS)” & “Stereolithography (SLA)” facilities.
We also have a “ONE MACHINE, ONE MATERIAL” policy, assuring & maintaining the highest quality for each 3D print.
METALS – Direct Metal Laser Sintering
EOS M100
Standard print area：
Ø 100 x 95mm (Ø 3.9 x 3.7 in)
(height incl. build plate)
Min. wall / column thickness：
approx. 0.02mm
Material：
Titanium 64 (TI64ELI)
EOS M280
Standard print area：
250mm x 250mm x 325mm
(9.85 x 9.85 x 12.8 in)
Min. wall / column thickness：
approx. 0.3 – 0.4mm
Material：
Maraging Steel
EOS M290
Standard print area：
250mm x 250mm x 325mm
Min. wall / column thickness：
approx. 0.3 – 0.4mm
Material：
Inconel (IN718)
Titanium 64 (TI64ELI)
AMCM M290
Standard print area：
250mm x 250mm x 325mm
Min. wall / column thickness：
approx. 0.3 – 0.4mm
Material：
Copper Cu
HIGH GRADE PLASTICS – Selective Laser Sintering
EOS P395
Standard print area：
340mm x 340mm x 600mm
Layer thickness：
0.06-0.12 mm
Material：
PA3200 GF
EOS P396
Standard print area：
340mm x 340mm x 600mm
Layer thickness：
0.06-0.12 mm
Material：
Nylon Polyamide (PA 2200)
FORMIGA P110
Standard print area：
200mm x 250mm x 330mm
Layer thickness：
0.06-0.12 mm
Material：
Nylon Polyamide (PA 2200)
RESIN – Stereolithography
CMET ATOMm-4000
Standard print area：
400mm x 400mm x 300mm
Layer thickness：
0.1 mm – 0.2mm
Material：
Epoxy
Materials Specific Facilities
In order to maintain the highest standard of quality & precision, each additive facility is dedicated only to one material.